Full and Partial House Rewiring Across Sussex and the South East

Rewiring specialists

Rewiring Older Homes and Flats, Staged Around You

A rewire replaces the cabling, accessories and protective devices that carry power around a property, rather than patching one circuit at a time. Older installations with rubber or fabric covered cable, no earth at the lighting points or a fuse box that still takes rewirable fuses have usually reached the end of their working life, and repairs stop being worthwhile.

Not every property needs everything stripped out. A partial rewire deals with the circuits that are actually at fault, a kitchen ring, a lighting circuit or the runs feeding an extension, while sound cabling is left in place. We test the existing installation first, then tell you plainly which circuits can stay and which need replacing, so you are not paying to redo work that is still serviceable.

Rewiring is often carried out while people are still living in the property, so the work can be staged rather than done in one go. We agree the order of rooms with you, keep power and lighting on wherever it is safe to do so, and give notice before a circuit is switched off, so you know which rooms will be without power and when.

House Rewiring by CK Electrical

About this service

What a Rewire Involves

Signs a Property May Need Rewiring

Rewiring tends to be prompted by the state of the wiring rather than its age alone. Rubber, lead or fabric covered cable, sockets with round pins, a fuse box with rewirable fuses, no earth wire at the light switches and lighting circuits that hum or flicker across several rooms all point the same way.

Repeated tripping on more than one circuit, scorch marks around accessories, warm switch plates and a shortage of sockets that has been solved with extension leads are also worth investigating. Testing will show whether a rewire is genuinely needed or whether targeted repairs will do.

What the Work Involves, First Fix to Second Fix

A rewire runs in two stages. The first fix lifts floorboards, chases walls and runs new cable back to the board for sockets, lighting, cooker, shower and any dedicated circuits, along with earthing and main bonding to the incoming water and gas services. Back boxes go in and the property is left ready for plastering where chasing has been needed.

The second fix fits the sockets, switches, light fittings and any alarms, connects everything into a new consumer unit and energises the installation circuit by circuit. Positions are agreed with you beforehand, which is the point at which most people add sockets where they actually use them rather than where the last electrician left them.

What to Expect While Work Is Under Way

Rewiring is disruptive by nature. Floorboards come up, walls are chased and there is dust, so furniture is best moved clear and carpets lifted in the rooms being worked on. We sheet up, cut back mess as we go and hoover through at the end of each day rather than leaving it all until the last one.

Making good is worth agreeing before the work starts. We will tell you which walls, ceilings and floors will need attention afterwards so you can line up a decorator, and chases can be filled ready for them. A rewire is also the easiest time to move a light, add an outside socket or run a cable for a future EV charger.

Testing, Certification and Building Regulations

Rewiring is notifiable work under the Building Regulations. We are Part P registered and work to the current wiring regulations, BS 7671, so the finished installation is inspected, tested and certified, and the notification is dealt with for you rather than left for you to arrange with building control.

You are left with an Electrical Installation Certificate covering the new work, together with the test results and a schedule of the circuits. Keep it safe: it is the document a buyer’s solicitor, a letting agent or an insurer will ask for, and it saves arguing later about what was replaced and when.

Response times

What Governs the Wait, and How a Fault Spreads

The honest answer is that it depends, and it is fairer to tell you what it depends on. Where the property sits in Sussex or the wider South East matters, as does the time of day, whether anyone can be there to let an engineer in, and how dangerous the symptoms you describe sound. You are told plainly where things stand when you call, rather than handed a figure that might not hold.

The phone is answered 24 hours a day, every day of the year, nights, weekends and bank holidays included, and the call itself does real work. Describing what you can see, hear and smell lets us sort a genuine hazard from work that is better booked in. A burning smell, scorching, sparking, a shock felt from a tap, or water that has reached wiring is treated ahead of a single dead socket.

Some faults are not ours to fix, and saying so on the phone saves a wasted visit. If the whole street is dark, the fault sits on the supply side and belongs to the distribution network operator, reported free on 105. Where it is yours, turn the installation off at the main switch if it is safe to reach, leave anything scorched or wet alone, and stop resetting a breaker that will not hold.

None of that is caution for its own sake. A loose or high resistance connection gives off heat whenever the circuit is loaded, and that heat carbonises the terminal and the insulation around it, which raises the resistance further, which makes more heat again. An MCB does not see it, because it protects the cable against overload and short circuit rather than the quality of a termination. What starts at one accessory can end as cable to replace and a wall to make good.

A shock works differently. Insulation that has failed can put metalwork at a voltage it should not be at, and a circuit protective conductor that is no longer continuous is what leaves it there, because fault current has no path back to operate the protective device. Completing that path takes a person, which is why what seems harmless in a dry room is another matter in your bathroom or outdoors. Equipment suffers too, since a lost neutral can leave appliances seeing an abnormal voltage.

Inside a modern consumer unit

Our process

How We Work, from First Visit to Final Certificate

  1. 01

    Your Call, Day or Night

    You can call us at any hour, every day of the year, including bank holidays. In an emergency we ask what has stopped working and whether anything is hot, sparking or smelling of burning, and tell you what to switch off until we arrive. Booked work, from a landlord certificate to solar panels or EV charging, starts on the same call.

  2. 02

    Arrival & Making Safe

    A Part P registered and fully insured engineer attends and makes the installation safe before anything else. Where there is a risk, the affected circuit or your fuse board is isolated, and anything that cannot be put right straight away is left in a safe condition. Planned work follows the same rule: circuits are proved dead before they are worked on.

  3. 03

    Diagnosis by Testing, Not Guesswork

    We work from readings rather than assumptions. Testing can include continuity, insulation resistance, polarity, earth fault loop impedance and RCD testing. The results show where a fault sits, what an installation can safely take, and whether a problem is inside your property or on the incoming supply, which belongs to the distribution network operator and is reported free on 105.

  4. 04

    Your Options & the Cost

    Before any repair or installation begins, we explain the options: what needs doing now, what can safely wait, and whether repair or replacement is the sensible choice. Quotes are free and carry no obligation, and nothing goes ahead until you agree the price, so there are no call-out surprises. If parts or a return visit are needed, we tell you then.

  5. 05

    Carrying Out the Work

    The same qualified engineers who took your call carry out the work, whether that is an overnight repair, a fuse board replacement, new lighting, smoke and heat alarms, a rewire, an inspection, solar panels or an EV charging point. It is done to the current wiring regulations, with cables and accessories fixed securely and neatly, and disruption kept to a minimum.

  6. 06

    Final Testing & Certification

    Before we leave, the work is tested and checked in operation, and the working area is left tidy. You are told plainly what was done and anything worth keeping an eye on. Certification is supplied where the work calls for it, so you hold a written record of what was carried out and the results of the testing.

Common questions

Frequently Asked Questions

How long does a full house rewire take?

It depends on the size of the property, how many circuits are involved and whether anyone is living there while the work goes on. An empty house moves faster than an occupied one. We will give you a realistic timescale after looking at the property, and tell you if anything found on the day changes it.

Can I stay in the house while it is being rewired?

Usually yes, if the work is staged. We take one area at a time, keep power and lighting running elsewhere where it is safe to do so, and tell you in advance when a circuit will be off. Kitchens and bathrooms are worth planning around, since those are the rooms people miss most.

Do I need a full rewire or will a partial one do?

Testing answers that. If the existing cabling is sound and only certain circuits are failing, a partial rewire on those circuits is often enough. Where the cable itself has deteriorated throughout, replacing it in sections tends to cost more overall than doing the lot in one visit. We will set out both options.

How much mess and damage does a rewire cause?

Some making good is unavoidable. Cables run under floors and inside walls, so boards are lifted and chases are cut, mainly around sockets, switches and the consumer unit. We keep chasing to what the route needs, sheet up and clear as we go, and tell you before work starts where redecoration will be required.

More from us

Other Electrical Services

Get in touch

Talk to an Electrician Today

Contact us today on 01273 000 247 for help, advice or a free no-obligation quote.

Contact Us